Wishlist
Carrinho de Compras 0
Subtotal: 0,00 €
IVA : 0,00 €
Total:
0,00 €
Finalizar Compra Compra 100% segura. Encriptação SSL 256 bits


Dan D'Agostino Progression Mono

The iconic look of the Momentum amplifiers’ power meters, inspired by the elegant faces of classic Swiss watches, continues with the Progression series. The Progression mono amplifier features a new meter design with a 270-degree needle swing, driven by a high-speed ballistic circuit that enhances the meter’s responsiveness. The longer swing allows the needle to cover the amplifier’s entire output range.
Ver Características
Produto Premium

The Progression mono amplifier is the largest and most powerful Dan D’Agostino Master Audio Systems has made to date, delivering 500 watts into 8 ohms, doubling to 1,000 watts into 4 ohms and doubling again to 2,000 watts into 2 ohms. It employs a fully complementary driver stage, beefed up with 48 output transistors, a 4000 VA power supply transformer and 400,000 microfarads of power supply storage capacitance.

Descrição

The venturi heatsink design premiered in the Momentum amplifiers has been adapted to the cooling needs of the Progression mono amplifier by increasing the diameter opening of each cooling tube opening. Each heatsink is milled from a single, 48.5-pound (22-kilogram) aluminum billet.
The Momentum series amplifiers focused on combining high power output with a relatively small form factor. The Progression mono delivers extraordinary power in a larger package with the ability to drive speakers to lifelike levels. 
The Progression circuitry borrows greatly from the flagship Momentum to be a perfect match for virtually any speaker. The audio signal path throughout is discrete, balanced, and direct coupled. Advanced protection techniques shield the amplifier and associated components from any unexpected anomaly. 
Like the Momentum amplifier, the Progression circuit boards are executed with through-hole construction for the best sound quality and durability. Like all our products, the Progression series components will be built by hand in our Arizona factory. The Progression mono amplifier is projected to ship in the first quarter of 2016 and will be available in silver or black finish.

Características

Power: 500 watts @ 8Ω / 1,000 watts @ 4Ω / 2,000 watts @ 2Ω

Frequency Response: 5 Hz to 80 kHz, -1 dB / 20 Hz to 20 kHz, ±0.1 dB

Distortion: (500 watts @ 8Ω) <.01% at 1 kHz

Signal-to-Noise Ratio: 103 dB, A-weighted

Gain: 30 dB

Power Consumption at Standby: <1 watt

Inputs: 1 balanced XLR

Outputs: High-quality binding posts

Weight: 56.7 kg

Chassis Dimensions: 22.8 x 44.5 x 58.4 cm (hwd)